Operating lamp operating precautions
Nowadays, operating lamp products are applied to a wide variety of operations. LED surgical shadowless lamps are widely used in hospitals and clinics. The overall surgical lights usually need to be fixed on the floor. The surgical lamp head needs to be fixed on the balance arm so that vertical and vertical can be done. Horizontal movement, stable operation and flexible movement, so it is necessary to meet different surgical height and angle requirements.
LED surgical lights bring great convenience to modern surgery and improve the success rate of surgery. Let the LED shadowless lamp take advantage of it better, and pay attention to the following matters when using it.
The correct operation method of surgical shadowless lamp, when using LED shadowless lamp, the working distance should be kept between 0.7 and 1.4 meters, the indoor temperature needs to be maintained at 10 to 40 degrees, and the temperature needs to be controlled. The relative humidity of the operating room also needs to be controlled. The humidity should not exceed 70%. If the humidity is too high, it will cause damage to the surgical lamp. Before using the LED surgical light, you can wipe the mirror surface with a soft cloth, but be careful not to wear the mirror. Stabilize when doing the operation, do not pull hard, which can effectively extend the service life of the surgical light. When the surgical lamp is not in use, the tension spring needs to be in a relaxed state, thereby preventing drift.
When the surgical shadowless lamp is not in use, it needs to be turned off. The advantages of this are: one is to save electricity, and the other is to reduce the charging load of the electrical products, thereby greatly improving the service life of the surgical lamp.